Alcohols, Phenols and Ethers – Class 12 Chemistry Notes
Alcohols, Phenols and Ethers is an important chapter in CBSE Class 12 Chemistry. These organic compounds contain oxygen and have different functional groups. Their structures, preparation methods and chemical reactions form the foundation of organic chemistry.
In these notes, you will learn about the classification, nomenclature, physical properties, chemical properties, important reactions and distinguishing tests of alcohols, phenols and ethers. These concepts will help you understand the chapter and prepare effectively for your CBSE Chemistry examination.
📚 Table of Contents
- Introduction
- Alcohols
- Classification of Alcohols
- Nomenclature
- Preparation of Alcohols
- Physical Properties of Alcohols
- Chemical Properties of Alcohols
- Phenols
- Preparation of Phenols
- Physical Properties of Phenols
- Chemical Properties of Phenols
- Ethers
- Preparation of Ethers
- Physical and Chemical Properties of Ethers
- Important Distinguishing Tests
- Important Organic Conversions
- Important Points for Revision
- Frequently Asked Questions
1. Introduction to Alcohols, Phenols and Ethers
Alcohols, phenols and ethers are three important classes of organic compounds containing oxygen as a functional group.
Although all three contain oxygen, their structures and chemical properties are different.
| Class | Functional Group | General Structure | Example |
|---|---|---|---|
| Alcohols | Hydroxyl group (-OH) | R-OH | Ethanol (C₂H₅OH) |
| Phenols | Hydroxyl group attached directly to an aromatic ring | Ar-OH | Phenol (C₆H₅OH) |
| Ethers | Ether linkage (-O-) | R-O-R' | Diethyl ether (C₂H₅OC₂H₅) |
2. Alcohols
- Methanol – CH₃OH
- Ethanol – C₂H₅OH
- Propanol – C₃H₇OH
- Butanol – C₄H₉OH
3. Classification of Alcohols
Alcohols are classified based on the number of hydroxyl groups and the nature of the carbon atom attached to the -OH group.
A. Based on the Number of Hydroxyl Groups
- Monohydric Alcohols: Contain one hydroxyl group. Example: CH₃OH.
- Dihydric Alcohols: Contain two hydroxyl groups. Example: HO-CH₂-CH₂-OH (Ethane-1,2-diol).
- Trihydric Alcohols: Contain three hydroxyl groups. Example: HOCH₂-CHOH-CH₂OH (Propane-1,2,3-triol).
B. Based on the Type of Carbon Attached to -OH
1. Primary (1°) Alcohol
An alcohol is primary when the carbon atom attached to the -OH group is bonded to only one other carbon atom (or no other carbon atom in methanol).
Example: Ethanol (CH₃CH₂OH).
2. Secondary (2°) Alcohol
An alcohol is secondary when the carbon atom attached to the -OH group is bonded to two other carbon atoms.
Example: Propan-2-ol (CH₃CHOHCH₃).
3. Tertiary (3°) Alcohol
An alcohol is tertiary when the carbon atom attached to the -OH group is bonded to three other carbon atoms.
Example: 2-Methylpropan-2-ol.
4. Nomenclature of Alcohols, Phenols and Ethers
A. IUPAC Nomenclature of Alcohols
- Select the longest carbon chain containing the carbon attached to the -OH group.
- Number the chain from the end nearest to the -OH group.
- Replace the final 'e' of the corresponding alkane with 'ol'.
- Indicate the position of the hydroxyl group using a suitable number.
| Structure | IUPAC Name |
|---|---|
| CH₃OH | Methanol |
| CH₃CH₂OH | Ethanol |
| CH₃CH₂CH₂OH | Propan-1-ol |
| CH₃CHOHCH₃ | Propan-2-ol |
| HOCH₂CH₂OH | Ethane-1,2-diol |
B. Nomenclature of Phenols
Phenol is the retained IUPAC name for hydroxybenzene. When other substituents are present, the carbon attached to -OH is assigned position 1.
| Structure/Compound | Name |
|---|---|
| C₆H₅OH | Phenol |
| 2-CH₃C₆H₄OH | 2-Methylphenol (o-Cresol) |
| 3-CH₃C₆H₄OH | 3-Methylphenol (m-Cresol) |
| 4-CH₃C₆H₄OH | 4-Methylphenol (p-Cresol) |
C. Nomenclature of Ethers
According to IUPAC nomenclature, ethers are named as alkoxyalkanes.
- Select the larger alkyl group as the parent alkane.
- Name the smaller group along with oxygen as an alkoxy substituent.
| Structure | IUPAC Name |
|---|---|
| CH₃OCH₃ | Methoxymethane |
| CH₃OC₂H₅ | Methoxyethane |
| C₂H₅OC₂H₅ | Ethoxyethane |
| CH₃OC₆H₅ | Methoxybenzene |
5. Preparation of Alcohols
Alcohols can be prepared by several methods. The important methods are discussed below.
1. From Alkenes by Hydration
Alkenes react with water in the presence of an acid catalyst to form alcohols. In unsymmetrical alkenes, the addition generally follows Markovnikov's rule.
Condition: Acid catalyst (H⁺).
2. From Alkyl Halides
Alkyl halides undergo hydrolysis with aqueous potassium hydroxide to form alcohols.
3. By Reduction of Aldehydes
Aldehydes are reduced to primary alcohols using reducing agents such as NaBH₄ or LiAlH₄.
4. By Reduction of Ketones
Ketones are reduced to secondary alcohols.
5. By Reduction of Carboxylic Acids
Carboxylic acids can be reduced to primary alcohols using lithium aluminium hydride (LiAlH₄).
Reagent: LiAlH₄, followed by hydrolysis.
6. By Reduction of Esters
Esters are reduced using LiAlH₄ to produce alcohols.
7. Using Grignard Reagents
Grignard reagents react with carbonyl compounds followed by hydrolysis to form alcohols.
| Carbonyl Compound | Alcohol Formed |
|---|---|
| Formaldehyde | Primary alcohol |
| Other aldehydes | Secondary alcohol |
| Ketones | Tertiary alcohol |
RCH₂OMgX + H₂O → RCH₂OH + Mg(OH)X
6. Physical Properties of Alcohols
1. Nature of Alcohols
Alcohols are polar compounds because of the presence of the electronegative oxygen atom in the hydroxyl group.
2. Hydrogen Bonding
Alcohol molecules form intermolecular hydrogen bonds due to the presence of the -OH group. As a result, their boiling points are higher than those of corresponding hydrocarbons and ethers of comparable molecular masses.
3. Boiling Point
Alcohols have relatively high boiling points because additional energy is required to overcome intermolecular hydrogen bonding.
4. Solubility in Water
Lower alcohols are soluble in water because they form hydrogen bonds with water molecules. However, solubility decreases as the size of the hydrophobic alkyl group increases.
7. Chemical Properties of Alcohols
Alcohols undergo reactions involving the cleavage of either the O-H bond or the C-O bond.
A. Reactions Involving Cleavage of O-H Bond
1. Reaction with Sodium Metal
Alcohols react with sodium metal to produce sodium alkoxide and hydrogen gas.
2. Esterification
Alcohols react with carboxylic acids in the presence of concentrated sulphuric acid to produce esters and water.
Condition: Conc. H₂SO₄, heat.
B. Reactions Involving Cleavage of C-O Bond
1. Reaction with Hydrogen Halides
Alcohols react with hydrogen halides to form alkyl halides.
The general reactivity order of hydrogen halides is:
HI > HBr > HCl
2. Reaction with Phosphorus Halides
ROH + PCl₅ → RCl + POCl₃ + HCl
3. Dehydration of Alcohols
Alcohols undergo dehydration in the presence of concentrated sulphuric acid to form alkenes.
Condition: Conc. H₂SO₄, 443 K.
The ease of dehydration generally follows the order:
3° > 2° > 1°
4. Intermolecular Dehydration
Two alcohol molecules react to form an ether in the presence of concentrated sulphuric acid at a suitable temperature.
Condition: Conc. H₂SO₄, 413 K.
C. Oxidation of Alcohols
Alcohols undergo oxidation to form different products depending on their classification.
| Alcohol Type | Oxidation Product |
|---|---|
| Primary alcohol | Aldehyde, followed by carboxylic acid |
| Secondary alcohol | Ketone |
| Tertiary alcohol | Resistant to oxidation under ordinary conditions; vigorous oxidation can cause C-C bond cleavage |
CH₃CHO + [O] → CH₃COOH
D. Dehydrogenation of Alcohols
When alcohol vapours are passed over heated copper at 573 K, different products are formed.
| Alcohol | Product |
|---|---|
| Primary alcohol | Aldehyde |
| Secondary alcohol | Ketone |
| Tertiary alcohol | Alkene (by dehydration) |
8. Phenols
General formula: Ar-OH.
Example: Phenol (C₆H₅OH).
Classification of Phenols
- Monohydric Phenols: Contain one -OH group. Example: Phenol.
- Dihydric Phenols: Contain two -OH groups. Example: Benzene-1,2-diol.
- Trihydric Phenols: Contain three -OH groups. Example: Benzene-1,2,3-triol.
9. Preparation of Phenols
1. From Haloarenes (Dow Process)
Chlorobenzene is heated with aqueous sodium hydroxide at high temperature and pressure to form sodium phenoxide. Acidification gives phenol.
Condition: 623 K, 300 atm.
C₆H₅ONa + HCl → C₆H₅OH + NaCl
2. From Benzene Sulphonic Acid
Benzene sulphonic acid is fused with sodium hydroxide to produce sodium phenoxide, which gives phenol on acidification.
C₆H₅ONa + HCl → C₆H₅OH + NaCl
3. From Diazonium Salts
Benzene diazonium chloride undergoes hydrolysis on warming with water to produce phenol.
Condition: Warm water.
4. From Cumene
Cumene (isopropylbenzene) is oxidised by air to form cumene hydroperoxide. Acidic decomposition produces phenol and acetone.
Cumene hydroperoxide → Phenol + Acetone
Condition: Acidic decomposition.
10. Physical Properties of Phenols
- Pure phenol is a colourless crystalline solid.
- Phenol has a characteristic smell.
- It is sparingly soluble in water because of its large hydrophobic aromatic ring.
- Phenol has a relatively high boiling point due to intermolecular hydrogen bonding.
- Phenol is acidic in nature and reacts with sodium metal and sodium hydroxide.
Acidity of Phenol
Phenol is more acidic than alcohols because its conjugate base, phenoxide ion, is stabilised by resonance.
The negative charge in the phenoxide ion is delocalised over the aromatic ring through resonance.
Comparison of Acidity
Carboxylic acids > Phenols > Water > Alcohols
The phenoxide ion is resonance stabilised, whereas the ethoxide ion is not. Therefore, phenol releases a proton more readily than ethanol.
Effect of Substituents on Acidity
- Electron-withdrawing groups such as -NO₂ increase the acidity of phenol by stabilising the phenoxide ion.
- Electron-donating groups such as -CH₃ decrease the acidity of phenol by destabilising the phenoxide ion.
For example, nitrophenols are generally more acidic than phenol. The position and number of substituents also affect acidity.
11. Chemical Properties of Phenols
A. Reactions of the -OH Group
1. Reaction with Sodium Metal
2. Reaction with Sodium Hydroxide
Phenol reacts with sodium hydroxide to form sodium phenoxide.
Unlike phenol, ordinary alcohols do not react with aqueous NaOH to produce alkoxides because alcohols are weaker acids than water.
3. Reaction with Zinc Dust
When phenol is heated with zinc dust, it produces benzene.
4. Esterification
Phenols react with acid chlorides or acid anhydrides to form esters. Direct esterification with carboxylic acids is not the usual method.
Product: Phenyl ethanoate.
B. Electrophilic Substitution Reactions
The -OH group activates the benzene ring and directs incoming electrophiles mainly towards the ortho and para positions.
1. Halogenation
Phenol reacts with bromine water to form 2,4,6-tribromophenol, which appears as a white precipitate.
Observation: Bromine water is decolourised and a white precipitate is formed.
2. Nitration
Phenol reacts with dilute nitric acid to form a mixture of ortho-nitrophenol and para-nitrophenol.
With concentrated nitric acid in the presence of concentrated sulphuric acid, phenol produces 2,4,6-trinitrophenol (picric acid).
3. Sulphonation
Phenol reacts with concentrated sulphuric acid to form ortho- and para-phenolsulphonic acids depending on temperature.
- At 293 K: Mainly o-phenolsulphonic acid.
- At 373 K: Mainly p-phenolsulphonic acid.
4. Kolbe's Reaction (Kolbe-Schmitt Reaction)
Sodium phenoxide reacts with carbon dioxide under pressure. Acidification of the resulting product gives salicylic acid (o-hydroxybenzoic acid) as the major product.
o-HOC₆H₄COONa + HCl → o-HOC₆H₄COOH + NaCl
Condition: CO₂ pressure, about 400 K, followed by acidification.
5. Reimer-Tiemann Reaction
Phenol reacts with chloroform (CHCl₃) and aqueous sodium hydroxide to produce salicylaldehyde (o-hydroxybenzaldehyde) after acidification.
→ o-HOC₆H₄CHO + 3NaCl + 2H₂O
Condition: Heat, followed by acidification.
6. Reaction with Formaldehyde
Phenol reacts with formaldehyde to form phenol-formaldehyde resin (Bakelite) through condensation and polymerisation.
Product: Bakelite.
12. Ethers
General formula: R-O-R'.
Examples:
- Dimethyl ether – CH₃OCH₃
- Diethyl ether – C₂H₅OC₂H₅
- Methyl ethyl ether – CH₃OC₂H₅
- Anisole – C₆H₅OCH₃
Classification of Ethers
1. Simple or Symmetrical Ethers
Both groups attached to the oxygen atom are identical.
Example: Dimethyl ether.
2. Mixed or Unsymmetrical Ethers
The two groups attached to the oxygen atom are different.
Example: Methoxyethane.
13. Preparation of Ethers
1. Dehydration of Alcohols
Two molecules of primary alcohol can undergo intermolecular dehydration in the presence of concentrated sulphuric acid at 413 K to form an ether.
Condition: Conc. H₂SO₄, 413 K.
2. Williamson Ether Synthesis
Williamson synthesis is an important method for preparing ethers. An alkoxide reacts with a primary alkyl halide through an SN2 mechanism to form an ether.
Example:
14. Physical and Chemical Properties of Ethers
Physical Properties
- Ethers are generally colourless and volatile liquids or gases depending on molecular mass.
- They are slightly polar due to the C-O bond.
- Ethers cannot form intermolecular hydrogen bonds with themselves because they do not contain an O-H bond.
- They have lower boiling points than corresponding alcohols of comparable molecular masses.
- Lower ethers have some solubility in water because oxygen can form hydrogen bonds with water molecules.
Chemical Properties
1. Cleavage by Hydrogen Halides
Ethers react with concentrated hydrogen halides, particularly HI and HBr, to undergo cleavage of the C-O bond.
With excess HI and suitable heating, the alcohol formed may further react to produce an alkyl iodide.
2. Reaction of Anisole with HI
Anisole reacts with HI to produce phenol and methyl iodide.
The aryl-O bond has partial double-bond character due to resonance. Therefore, cleavage takes place at the alkyl-O bond rather than the aryl-O bond.
3. Electrophilic Substitution in Anisole
The -OCH₃ group activates the benzene ring and directs electrophilic substitution towards the ortho and para positions.
A. Halogenation
Anisole reacts with bromine in ethanoic acid to form a mixture of ortho-bromoanisole and para-bromoanisole. The para product is generally the major product.
B. Nitration
Anisole reacts with a nitrating mixture of concentrated nitric acid and concentrated sulphuric acid to produce ortho- and para-nitroanisole.
C. Friedel-Crafts Reaction
Anisole undergoes Friedel-Crafts alkylation and acylation, mainly at the ortho and para positions.
Reagent: Anhydrous AlCl₃.
15. Important Distinguishing Tests
These tests are useful for identifying alcohols, phenols and ethers in organic chemistry.
| Test | Alcohol | Phenol | Ether |
|---|---|---|---|
| Neutral FeCl₃ test | Generally no characteristic colour | Violet, blue or green colour with many phenols | No characteristic colour |
| Bromine water | Generally no reaction | Decolourisation with white precipitate for phenol | Generally no reaction |
| Sodium metal | Hydrogen gas evolved | Hydrogen gas evolved | No reaction under ordinary conditions |
| Aqueous NaOH | No reaction under ordinary conditions | Forms soluble sodium phenoxide | No reaction |
Lucas Test for Alcohols
The Lucas reagent consists of concentrated HCl and anhydrous ZnCl₂. It is used to distinguish primary, secondary and tertiary alcohols based on the time taken for turbidity to appear.
| Alcohol | Observation at Room Temperature |
|---|---|
| Primary (1°) | No turbidity at room temperature; reaction is very slow. |
| Secondary (2°) | Turbidity appears after a few minutes. |
| Tertiary (3°) | Immediate turbidity. |
16. Important Organic Conversions
Organic conversions are important for understanding the reaction pathways of alcohols, phenols and ethers.
1. Ethanol to Ethene
Reagent: Conc. H₂SO₄, 443 K.
2. Ethanol to Ethanal
3. Ethanol to Ethanoic Acid
4. Ethanol to Ethoxyethane
Reagent: Conc. H₂SO₄, 413 K.
5. Phenol to Benzene
6. Phenol to Salicylic Acid
→ Sodium salicylate
→ Salicylic acid
Reagents: NaOH, CO₂, followed by H⁺.
7. Phenol to Salicylaldehyde
→ Salicylaldehyde
Reagent: Reimer-Tiemann reaction.
8. Anisole to Phenol
9. Ethanol to Chloroethane
Reagent: ZnCl₂.
10. Propan-2-ol to Propanone
17. Important Points for Quick Revision
- Alcohols contain the -OH group attached to a saturated carbon atom.
- Phenols contain the -OH group directly attached to an aromatic ring.
- Ethers contain an oxygen atom between two carbon-containing groups.
- Primary alcohols oxidise to aldehydes and then carboxylic acids.
- Secondary alcohols oxidise to ketones.
- Phenols are more acidic than alcohols due to resonance stabilisation of the phenoxide ion.
- Electron-withdrawing groups increase the acidity of phenols.
- Phenol gives a violet-coloured complex with neutral FeCl₃ solution.
- Phenol reacts with bromine water to form 2,4,6-tribromophenol.
- Kolbe-Schmitt reaction produces salicylic acid.
- Reimer-Tiemann reaction produces salicylaldehyde.
- Williamson synthesis is used for the preparation of ethers.
- Anisole is an example of an aromatic ether.
- Ethers have lower boiling points than corresponding alcohols because they cannot form intermolecular hydrogen bonds with each other.
- Lucas reagent is used to distinguish primary, secondary and tertiary alcohols.
18. Important Reagents and Their Uses
| Reagent | Purpose |
|---|---|
| Na metal | Formation of alkoxides and phenoxides with hydrogen gas evolution. |
| Conc. H₂SO₄ | Dehydration of alcohols and ether preparation under suitable conditions. |
| LiAlH₄ | Reduction of aldehydes, ketones, acids and esters. |
| NaBH₄ | Reduction of aldehydes and ketones. |
| Lucas reagent | Distinguishing 1°, 2° and 3° alcohols. |
| Neutral FeCl₃ | Identification of phenolic compounds. |
| Bromine water | Identification of phenol. |
| CHCl₃ + NaOH | Reimer-Tiemann reaction. |
| CO₂ + NaOH | Kolbe-Schmitt reaction through sodium phenoxide. |
| HI | Cleavage of ethers. |
| Zn dust | Conversion of phenol into benzene. |
19. Frequently Asked Questions (FAQs)
1. What are alcohols, phenols and ethers in Class 12 Chemistry?
Alcohols are organic compounds containing a hydroxyl group (-OH) attached to a saturated carbon atom. Phenols contain an -OH group directly attached to an aromatic ring. Ethers contain an oxygen atom bonded to two alkyl or aryl groups (R-O-R').
2. What is the difference between alcohols and phenols?
In alcohols, the hydroxyl group is attached to a saturated carbon atom. In phenols, the hydroxyl group is directly attached to an aromatic ring. Phenols are generally more acidic than alcohols.
3. Why is phenol more acidic than alcohol?
Phenol is more acidic because its conjugate base, the phenoxide ion, is stabilised by resonance. The alkoxide ion formed from an alcohol does not have similar resonance stabilisation.
4. Why do alcohols have higher boiling points than ethers?
Alcohol molecules form intermolecular hydrogen bonds because of their -OH groups. Ethers cannot form hydrogen bonds with themselves, so their boiling points are generally lower than those of comparable alcohols.
5. What is Williamson ether synthesis?
Williamson ether synthesis is a method of preparing ethers by reacting sodium alkoxide with an alkyl halide through an SN2 reaction. Primary alkyl halides are preferred for better yields.
6. What is the Kolbe reaction of phenol?
In the Kolbe-Schmitt reaction, sodium phenoxide reacts with carbon dioxide under pressure. Acidification produces salicylic acid (o-hydroxybenzoic acid) as the major product.
7. What is the Reimer-Tiemann reaction?
Phenol reacts with chloroform and aqueous sodium hydroxide to produce salicylaldehyde (o-hydroxybenzaldehyde) after acidification.
8. How can phenol be identified?
Phenol can be identified using neutral ferric chloride solution, which produces a characteristic violet, blue or green colour. It also reacts with bromine water to form a white precipitate of 2,4,6-tribromophenol.
9. What is the oxidation product of primary and secondary alcohols?
Primary alcohols produce aldehydes on controlled oxidation and carboxylic acids on further oxidation. Secondary alcohols produce ketones.
10. What happens when phenol reacts with zinc dust?
Phenol reacts with zinc dust on heating to form benzene and zinc oxide. This reaction is used to convert phenol into benzene.
11. What happens when anisole reacts with HI?
Anisole reacts with hydrogen iodide to form phenol and methyl iodide. The alkyl-O bond is cleaved because the aryl-O bond has partial double-bond character due to resonance.
12. What is the Lucas test in organic chemistry?
The Lucas test uses concentrated HCl and anhydrous ZnCl₂ to distinguish primary, secondary and tertiary alcohols. Tertiary alcohols show immediate turbidity, secondary alcohols show turbidity after a few minutes, while primary alcohols generally do not show turbidity at room temperature.
13. Which reaction converts phenol into salicylic acid?
The Kolbe-Schmitt reaction converts sodium phenoxide into sodium salicylate using carbon dioxide. Acidification then produces salicylic acid.
14. What is the general formula of ethers?
The general structure of ethers is R-O-R', where R and R' represent alkyl or aryl groups. They may be identical or different.
15. Which alcohol gives a ketone on oxidation?
Secondary alcohols give ketones on oxidation. For example, propan-2-ol produces propanone.
20. Conclusion
The chapter Alcohols, Phenols and Ethers explains the chemistry of three important classes of oxygen-containing organic compounds. Understanding their functional groups, preparation methods, physical properties and chemical reactions is essential for mastering organic chemistry.
For effective CBSE exam preparation, practise the important named reactions, organic conversions, acidity comparisons and distinguishing tests. Regular revision of reaction mechanisms and reagents will also improve your confidence in solving application-based questions.
🎯 Prepare Smarter with SkillShala!
Make your CBSE Class 12 Chemistry preparation easier with concept-based learning, chapter-wise notes, practice questions and exam-oriented study resources.
Learn. Practise. Excel.